mixed polymer
英 [mɪkst ˈpɒlɪmə(r)]
美 [mɪkst ˈpɑːlɪmər]
网络 混聚物
双语例句
- This system consists of bentonite, mixed metal hydroxide, cationic polymer and non-ionic surfactants etc.
该体系是由膨润土，混合金属氢氧化物、阳离子聚合物、非离子表面活性剂等组成的。 - Sludge concentration entering the drum belt dewatering equipment integration, Preparation through flocculant dosing system will be mixed into the polymer flocculant reaction vessel.
污泥在进入转鼓浓缩带式脱水一体化设备之前，通过絮凝剂制备投加系统将高分子絮凝剂打入混合反应槽中。 - This paper studied the relative viscosity and surface tension of the solution mixed with polymer PAM/ PVP and surfactant SDS, confirming the existence of the interaction between them.
本文通过对聚合物PAM/PVP与表面活性剂SDS混合体系的相对粘度和表面张力研究，证明聚合物PAM/PVP与表面活性剂SDS之间存在着明显的相互作用。 - Based on creepy transport model of single solvent in polymer membrane, a transport model of mixed solvents in polymer membrane was presented by considering the coupling between mixed solvents.
以单溶剂在高分子膜中的蠕变传递模型为基础，通过考虑溶剂间的耦合作用对溶剂在高分子膜中传递过程的影响，建立了混合溶剂在高分子膜中传递的蠕变模型。 - Study on Apparent Thermodynamic Properties of HCl in Mixed Solutions-The System of HCl-glucose-H_2O Rheologic Behavior of Aqueous Polymer Solutions in Extension as Influenced by Water Quality
盐酸在葡萄糖水溶液中表观热力学性质研究水质对聚合物溶液拉伸流变特性的影响 - The characters of the mixed solution of Linked Polymer Solution ( LPS) and MB were investigated using Scanning Electron Microscope ( SEC), Dynamic Light Scatter ( DLS), Rheometer and Core shutoff test.
采用扫描电镜、动态光散射、流变仪和岩心封堵实验研究了染色后交联聚合物的线团形态尺寸和溶液的流变性、封堵特性。 - Gh structure conductive carbon black ( CB), selected as conductive filler, was melting mixed with semi-crystal polymer high density polyethylene ( HDPE) to make conductive composites.
采用高结构导电炭黑（CB）VXC-72与半晶聚合物高密度聚乙烯（HDPE）进行熔融共混，制备复合型导电高分子材料。 - Study on the Mixed Reverse Micellar Aggregates Formed from AOT and Polymer Surfactants
琥珀酸二（2-乙基己基）酯磺酸钠与聚合物表面活性剂形成的混合反胶团研究 - Mixed Metal Polymer Catalyst and It's Catalytic Activity for Hydrogenation
混合金属高分子催化剂及其催化加氢活性的研究 - Hydrogen-bonding Interaction in Water/ Methanol Mixed Solvent and Theoretical Studies on Solubility of Polymer Chain
水和甲醇混合溶剂氢键相互作用及对高分子链溶解能力的理论研究 - Based on the above analysis, the mixed quantity and proportion of polymer additive of mortar has been proposed as reference for practical application in masonry project.
在上述分析的基础上，给出了改性砂浆用于各类砌体的建议掺量和配比，以作为工程实际应用的参考。 - Measurement of Vapor liquid Equilibrium of the Mixed Solvent/ Polymer Ternary Systems
混合溶剂/高分子系统汽液平衡测定 - A research on the property of mixed polymer/ sdbs solution
聚合物/SDBS混合溶液性质研究 - Viscosity characteristic of mixed polymer/ surfactant solution
聚合物/表面活性剂混合溶液粘度特性 - Polymethylmethacrylate in mixed solvents ⅳ. equilibrium swelling of a slightly crosslinked polymer in mixed solvents
聚甲基丙烯酸甲酯混合溶剂体系Ⅳ.交联聚合物在混合溶剂中的溶胀 - It is verified in theory that the multiple-screw extruders have good material transportation and mixed ability. Multiple-screw extruder is fitter for polymer processing.
从理论上验证了多螺杆反应器在物料输运能力以及物料混合能力等方面均具有较佳的能力，多螺杆反应器更适合聚合物的加工。 - The filler mixed quality in polymer directly influences the polymer product quality.
聚合物与填料的混合质量，直接影响聚合物成品质量。 - A small quantity photosensitive pre-polymer monomer are mixed together with nematic liquid crystal. The reversed-mode polymer network stabilized liquid crystal film can be fabricated using photo-initiated polymerization induced phase separation method ( PPIP).
实验发现在液晶中添加少量的预聚物单体，利用光聚合诱导相分离的方法可以形成反型显示模式的聚合物网络稳定液晶膜。 - Adjustment of Gelation Time for Heat Resistant and Salts Tolerant Mixed Aldehydes/ Polymer Weak Gel
耐温抗盐的醛交联聚合物弱凝胶成胶时间的控制 - Fluorescence spectra of sulfonated polystyrene ( SPS) in dichloroethane ( DCE) and mixed solvents have been measured as a function of polymer concentration.
测定了磺化聚苯乙烯（SPS）在二氯乙烷及混合溶剂中的荧光光谱。 - Permeation of SO2, N2 and separation of SO2-N2 mixed gas through functional polymer membrane of poly ( vinyl alcohol) modified with propyl vinyl sulfoxide have been studied.
丙基乙烯基亚砜改性聚乙醇功能高分子膜对SO2，N2及SO2-N2混合气体的渗透性能研究表明，该膜具有高选择透过SO2的优良性能。 - Then, we mixed nanoparticles with polymer according to different proportion, and exerted a series of processing technics to equably disperse nanoparticle into polymer.
分别将经过上述两种方法分散的纳米粒子按照不同的配比与聚合物基体树脂PVC相混合，经过一系列的加工工艺，使纳米粒子能够均匀地分散于基体树脂中，并与之有强的界面结合。 - The design of cement-acrylamide mixed curtain, the anti-squeezing ability of acrylamide polymer in consolidation and water proofing of sand, and the formulations and concentrations of acrylamide grouts are discussed in this paper also.
文中还讨论了水泥-丙凝混合帷幕的设计、丙凝用于固砂止水时的抗挤能力和有关丙凝化灌的配方及浓度等问题。 - An epoxy-acrylic resin was prepared at the presence of an active catalyst at ambient temperature, then mixed with castor oil polyurethane prepolymer to obtain an IPN polymer coating.
采用一种新型活性催化剂，在常温下制备环氧&丙烯酸酯，再与蓖麻油聚氨酯预聚体制成互穿网络涂料。 - The wear debris was pushed to the ends of wear tracks mixed with dust particles and frictional polymer.
磨损碎屑被逐渐推到磨损区端部与尘土、摩擦聚合物混合聚集在一起。 - Thanks to the "masking" technique that employs a cavity function to depict a hard wall with a certain thickness, the phase separation of mixed polymer brushes was investigated at a nanosphere with its radius comparable to the polymer size.
我们采用所谓的“masking”方法，即采用空穴函数来描述有一定厚度的硬壁，研究了当微球尺寸和高分子尺寸相当时，高分子共混刷体系在纳米微球上的相分离行为。 - Mixed sodium carboxymethyl cellulose with other water-absorbent polymer material, such as cross-linked carboxymethyl cellulose sodium, pectin, gelatin, starch determined the content of these hydrocolloid effect on the absorption, swelling capacity and integrity of the medical pressure-sensitive water-absorbent.
以羧甲基纤维素钠作为基本的吸水性高分子材料，改变其中交联羧甲基纤维素钠、果胶、明胶、淀粉的含量测定其吸水性、溶胀性和完整性。 - However, pure silk fibroin material is relatively brittle, and silk fibroin material mixed with other synthetic or natural polymer material can achieve the purpose of improving mechanical strength, for example, PVA, chitosan, collagen and so on.
但是，纯的丝素蛋白材料是比较脆的，丝素蛋白材料可以通过与其它的合成或天然的聚合物材料相混合进而达到提高力学强度的目的，例如，PVA，壳聚糖，胶原等等。 - The mixed state of polymer and filler in extrusion has a great influence on the performance of the composite material products.
聚合物和填充料在挤出机机筒中的混合状况，对复合材料制品的性能有很大影响。 - Aluminum hydroxide is easily decomposed when it is mixed with hot organic polymer materials. Its lower decomposition temperature limits its application performance and application field.
由于氢氧化铝分解温度低，在与有机高聚物加工过程中易分解，影响产品的使用性能，限制了其应用范围。